PRT CTRL Integrated Controller Reference Manual

pressed to view the exact details of the alarm memory. Alarm memory is provided for each
area and stores the last four different activations.
• Select the alarm memory view menu [MENU, 5, 1]. The display will show the first
area that the currently logged in user has access to. This will display the alarm
memory status on the second line of the display.
Warehouse
*Mem Empty*
• If an area does have an alarm in memory the display will show the alarm(s) in
memory on the second line of the display.
Warehouse
*Alarms in mem*
• Pressing the [ENTER] key will display the specific zone information for the area
selected this will scroll the zone information. In the following example the
warehouse PIR was activated in the warehouse area.
Had ALARM on
Warehouse PIR
in Area
Warehouse
Press [ENTER] to
acknowledge.
Press [] to
show next item.
Press [MENU] to
exit view mode.
Pressing the [] key will display the next zone that is stored in memory. To
acknowledge memory the user must also have the acknowledge option set in their
menu group or in the user configuration.
System Trouble View
System troubles can be viewed by selecting [MENU, 5, 2], trouble conditions are generated
by the activation of a trouble zone. The system has 3 trouble groups (General, System and
Access) with individual troubles within each group. The Protégé Security System continually
performs self diagnostics of system devices and monitors trouble conditions that can occur on
the system. For a trouble zone to generate a trouble condition the trouble zone must belong
to an area that has the 24 Hour portion of the area enabled. If a trouble condition is present
Protégé Integrated System Controller Reference Manual
338