PRT CTRL Integrated Controller Reference Manual

Language
English
Use the [1] and [3] keys to scroll the language selection until you reach the required
language and press [ENTER] to proceed. For more information about the list control data
entry refer to the section List Control Data Entry on Page 406.
System Controller Restart
To access the system controller restart menu select [MENU, 4, 9, 3]. The screen will
immediately prompt “Press [ENTER] to restart panel”.
Pressing the [ENTER] key will restart the panel. The keypad that is currently being used will
be restarted and will go offline for a short period of time while the panel restarts. This is part
of normal operation for a panel restart.
Press [ENTER] to
restart panel.
If a panel restart is not required press the [MENU] key to exit and remain logged in or press
the [CLEAR] key to exit and logout.
System Controller Restart in Bios Mode
To access the system controller restart menu select [MENU, 4, 9, 4]. The screen will
immediately prompt “Press [ENTER] to restart panel”.
Pressing the [ENTER] key will restart the panel in bios mode, which allows firmware updates
to be performed. The keypad that is currently being used will be restarted and will go offline
for a short period of time while the panel restarts. This is part of normal operation for a panel
restart.
Press [ENTER] to
restart panel.
If a panel restart is not required press the [MENU] key to exit and remain logged in or press
the [CLEAR] key to exit and logout.
Protégé Integrated System Controller Reference Manual
332