PRT CTRL Integrated Controller Reference Manual

Disabled the system controller will not log the events.
Option 7 - Log Operating System Assertion Events
Enabled the system controller will log operating system assertion events
that occur. An assertion event is generating when the system controller gets
a value, command or performs a function that results in a condition that is
not deemed normal.
Disabled the system controller will not log operating system assertion
events.
Option 8 - Remote Login Not Required
Enabled the system controller will not validate the login and user name that
is provided from the remote Protégé System Management Suite or other
remote host systems that must log in to the system.
Disabled the system controller will require that any external host accessing
the system uses a valid login and user id number to gain access.
It is recommended not to enable/disable or modify the settings of reserved options.
Miscellaneous Options
Miscellaneous options include configuration settings that affect the offline functions and
remote intelligent door reader operations.
Misc Options
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 – Auto Update Offline Users
Enabled the system controller will automatically update offline configuration
parameters to all RDI modules at the time programmed in the Offline User
Update Time.
Disabled the system controller will take no action for offline users.
Option 2 – Use Alternate Resistors
Enabled the system controller will use alternate EOL configured resistors
(2K2 and 6K8).
Disabled the system controller will use the normal 1K and 1K resistor
configuration.
Option 3 – Invert Module Tamper
Enabled the system controller will invert the module tamper input allowing a
normally open (door closed) tamper switch to be used.
Disabled the system controller will use the standard normally closed (door
closed) tamper switch.
Protégé Integrated System Controller Reference Manual
330