PRT CTRL Integrated Controller Reference Manual

To modify the port (000 to 65565), use the keypad as explained in section Entering Decimal
Numbers on Page 405 and press [ENTER].
Panel Options
Panel options include configuration settings that affect the test report trouble zone, login and
security parameters as well as the operation of certain panel hardware devices.
Panel Options
[-2-----8]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - High Current Battery Charging
Enabled the system controller will set the charge current to 750mA.
Disabled the system controller will set the charge current to 350mA.
Option 2 - Test Report Time Operation
Enabled the test report trouble zone will be activated at a specific time for
example 2:00am each morning.
Disabled the test report will be done at each interval programmed in the
test report time setting. For example setting 00:15 will activate the test
report trouble zone every 15 minutes.
Option 3 - Trouble Condition Require Acknowledge
Enabled any trouble condition will be latched and remain active until a user
logs in the keypad and acknowledges the trouble condition.
Disabled the system controller will automatically clear the trouble condition
when the trouble has been cleared.
Option 4 - Reserved
Reserved.
Reserved.
Option 5 - Generate Trouble Zone Test Report Restore
Enabled the system controller will generate a restore event for the trouble
zone test report zone restoring. This occurs one minute after the trouble
zone has been activated.
Disabled the system controller will not generate a restore.
Option 6 - Log Zone Reference Updates
Enabled the system controller log zone reference changes that it performs
as a result of calculations that it performs periodically to ensure a high level
of system integrity.
329 Protégé Integrated System Controller Reference Manual