PRT CTRL Integrated Controller Reference Manual

numbers below 10 hours. Example 09:00
G
A
a
D
V
v
s
R
Show the time in 12 hour format with leading spaces and no am/pm
symbol. Example 11:02.
Show the AM/PM symbol in uppercase. Example PM.
Show the AM/PM symbol in lowercase. Example pm.
Show the day of the month. Example 9 or 18 a leading space is used for
all numbers below 10.
Show the month in an abbreviated 3 characters. Example Jan or Nov.
Show the month in 2 character format. Example 4 or 12 a leading space
is used for all numbers below 10.
Show the month in 2 character format. Example 04 or 12 a leading zero
is used for all numbers below 10.
Show the day of the week in abbreviated 3 characters. Example Mon or
Fri.
Y Show the year with leading zeros. Example 05.
C Show the century. Example 20 or 19.
K
k
Show the temperature from the local temperature sensor on the LCD
keypad in Degrees Celsius. Example 22.5˚C. This will be updated from
the LCD keypads temp sensor.
Show the temperature from the local temperature sensor on the LCD
keypad in Degrees Fahrenheit. Example 76.5˚f. This will be updated
from the LCD keypads temp sensor.
Panel Name
The panel name is programmed to identify the panel to the operator or system user. Ideally
should describe the name of the premises or the building where the panel is installed. The
panel name is also used within the IP and SMTP Mail Services to identifiy the panel to the e-
mail recipient.
Panel Name
PROTEGE
To modify or enter a new name for the panel use the keypad as explained in section Entering
Text and Names on Page 406 and press [ENTER].
Panel Network Address
The panel network address sets the address that the system controller will communicate
when connected using RS485 communications. This allows multiple panels to be connected
using a single RS-485 Serial Communications Interface.
When connecting with TCP/IP this address should be programmed as 000 as the TCP/IP
address will be used to identify this unit.
Protégé Integrated System Controller Reference Manual
326