PRT CTRL Integrated Controller Reference Manual

FN001 Control
Zone CP001:01
To modify the input Zone, use the settings as explained in section Entering Zones on Page
411.
Counter Register
Enter the Register that will be incremented by the zone. The actual value of the counter is
calculated as (Overflow Register * 65565) + Counter Register.
FN001 Counter
reg: 00100
Overflow Register
Enter the Register that will be incremented when the Counter register overflows.
FN001 Overflow
reg: 00101
Reset PGM
The counter and overflow registers are set to zero when this PGM activates. When this occurs
and event is logged with the total before the reset occurs. The counter cannon be reset by a
PGM group.
FN001 Reset
pgm: --000:00
To modify the input PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
319 Protégé Integrated System Controller Reference Manual