PRT CTRL Integrated Controller Reference Manual

FN001 Func Mode
Normal
Use the [1] and [3] keys to scroll the function mode until you reach the normal selection and
press [ENTER] to proceed to the next programmable option for the door control function. For
more information about the list control data entry refer to the section List Control Data Entry
on Page 406.
Miscellaneous Options
These options are for the function.
FN001 Misc
[1--------]
Option 1 – Increment on Zone Open
Enable the counter will increment when the zone opens (alarm).
Disable.
Option 2 – Increment on Zone Close
Enable the counter will increment when the zone closes (seal).
Disable.
Option 3 – Log Counter Events
Enable the function will log an event for every increment.
Disable.
Option 4 – Decrement on Zone Open
Enable the counter will decrement when the zone opens (alarm).
Disable.
Option 5 – Decrement on Zone Close
Enable the counter will decrement when the zone closes (seal).
Disable.
Option 6 – No Overflow on Register
Enable the counter will not overflow (or underflow) when the register
reaches or 65535 counting up and 0 when counting down.
Disabled the register will wrap around to 0 when incremented past 65535
and will wrap around to 65535 when decremented past 0.
Option 7 to 8 - Reserved
Control Zone
The control zone will increment the counter register based on the options selected above.
Protégé Integrated System Controller Reference Manual
318