PRT CTRL Integrated Controller Reference Manual

FN001 Input one
pgm: --000:00
To modify the input PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Elevator Group
The elevator group selects the elevators to control as a result of the action being performed
by the programmable function.
FN001 Elev Grp
None
Use the [1] and [3] keys to scroll the action types until you reach the elevator group that you
want to control and then press [ENTER] to proceed to the next programmable option for the
door control function. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406.
Floor Group
The floor group selects the floors that will be activated on all of the elevators in the elevator
group as a result of the action being performed by the programmable function.
FN001 Floor Grp
None
Use the [1] and [3] keys to scroll the floor groups until you reach the required group and
then press [ENTER] to proceed to the next programmable option for the elevator control
function. For more information about the list control data entry refer to the section List
Control Data Entry on Page 406.
Token Unlock Time
The token unlock time is the period of time the floor group will be activated for as a result of
the action by the programmable function.
FN001 Token
time: 010 secs
Elevator Control Mode
The control mode selects how the floor group will be controlled. This allows a door to be
unlocked for the token time, unlock latched or unlocked in the fire alarm mode.
FN001 Door Mode
Menu Timed
Use the [1] and [3] keys to scroll the door control mode until you reach the setting that you
want to use and then press [ENTER] to proceed to the next programmable option for the
Protégé Integrated System Controller Reference Manual
316