PRT CTRL Integrated Controller Reference Manual

The ability to limit the area's that a user has access to and which area's are displayed is
programmable refer to the access level programming section.
*Area 001
is DISARMED
The area status display can be accessed in three ways depending on the programmed options
for the user who logged in to the system and the configured options set for the keypad the
user used to login.
• If Direct Menu Mode is turned on the user is taken directly to the Arm/Disarm
menu item (first item available in the main menu) at which point they can select
[MENU, 1].
Shortcut Keys: [123456, ENTER, MENU, 1]
Change Area Display: [] and []
• If menu mode is tuned off the user will be taken directly to the area status display
once they have logged in, this is a shortcut access and is recommended for most
users. This is the default operation of the users with the exclusion of the installer.
Shortcut Keys: [123456, ENTER]
Change Area Display: [] and []
• If the user is already logged in to the system the area status display can be access
by selecting [MENU, 1].
Shortcut Keys: [MENU, 1]
Change Area Display: [] and []
The area control functions allow the user to perform the following actions on the selected
area.
Area Security
• Disarming (Page 33)
• Regular Arming (Page 31)
• Force Arming (Page 31)
• Stay Arming (Page 32)
• 24HR Arming (Page 33)
• 24HR Disarming (Page 34)
• Area Group Arming (Page 35)
• Area Group Disarming (Page 36)
The area status display does not show all areas to all users. The area security control with the
Protégé allows various groups of area's to be displayed to a user depending on the access
that the user has and the area's that are allowed to be controlled by the keypad they have
logged in to.
• The keypad that the user has logged in to will display the primary area that is
assigned to that keypad if the user who logged in has access to the primary area.
• If the area is disarmed, it will be displayed if the area belongs to the keypad group
and to either the user arm group or disarm group.
Protégé Integrated System Controller Reference Manual
30