PRT CTRL Integrated Controller Reference Manual

modified further from this state and will not be modified if it is
turned ON by another function.
Input One
Output
LOCKED
Pulse Off
The pulse on action will unlock the door only when the input one
has transitioned from an ON to an OFF state. The door will not be
modified further from this state and will not be modified if it is
turned OFF by another function.
Input One
Output
UNLOCKED
Not Pulse Off
The not pulse off action will unlock the door only when the input
one has transitioned from an ON to an OFF state. The output will
not be modified further from this state and will not be modified if
it is turned ON by another function.
Input One
Output
LOCKED
Input One PGM
Input one selects the input source to the door control process that is being configured. All
door control functions use at least one input source. Input one must be programmed with a
valid input source, if an input source is selected that is not valid when the function is started
an error will be generated and the function suspended. An input source can be a PGM
(Programmable Output).
FN001 Input one
pgm: --000:00
To modify the input PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Control Door
The control door selects the door to control as a result of the action being performed by the
programmable function. To control a door group leave the control door option set to none and
proceed to the Control Door Group entry screen. Selecting both a door and a door group will
result in only the door being controlled and the door group being ignored.
FN001 Door
None
Use the [1] and [3] keys to scroll the action types until you reach the door that you want to
control and then press [ENTER] to proceed to the next programmable option for the door
control function. For more information about the list control data entry refer to the section
List Control Data Entry on Page 406.
307 Protégé Integrated System Controller Reference Manual