PRT CTRL Integrated Controller Reference Manual

Use the [1] and [3] keys to scroll the function mode until you reach the normal selection and
press [ENTER] to proceed to the next programmable option for the door control function. For
more information about the list control data entry refer to the section List Control Data Entry
on Page 406.
Door Action
The action determines what action is performed on the door or door group that is
programmed as a result of the Input PGM. An action MUST be selected for the programmable
function to operate correctly.
FN001 Action
None
Use the [1] and [3] keys to scroll the action types until you reach the required action that
you want to be performed and then press [ENTER] to proceed to the next programmable
option for the door control function. For more information about the list control data entry
refer to the section List Control Data Entry on Page 406.
Logic Action
Follow and Test
Description
The door status follows the programmed input one state and will
retest the input state every 30 second interval and change the
door state accordingly.
Input One
ON
OFF
Door
UNLOCKED
LOCKED
Test Action - If the door state is changed externally or is part of
another programmable function the programmable function will
only restore the output state after 30 seconds has elapsed. This
time is only used if the programmable function was NOT
responsible for the change in state. If a door has a door unlock
time and the door mode is set to timed this will unlock the door
every 30 seconds.
Not Follow and
Test
Performs the same function as above however the output is
inverted (NOT). This logic action is a test action, consult the
follow and test action for an explanation of the Test Function.
Input One
ON
OFF
Output
LOCKED
UNLOCKED
Pulse On
The pulse on action will unlock the door only when the input one
has transitioned from an off to an on state. The door will not be
modified further from this state and will not be modified if it is
turned OFF by another function.
Input One
Output
UNLOCKED
Not Pulse On
The not pulse on action will lock the door only when the input one
has transitioned from an off to an on state. The door will not be
Protégé Integrated System Controller Reference Manual
306