PRT CTRL Integrated Controller Reference Manual

Forward PGM
The forward PGM is used to drive the fan in the forward direction this will circulate air from
the intake through the heating element and towards the floor. In the forward mode the
temperature at the floor is below the set point.
FN001 Forward
pgm: --000:00
To modify the forward PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Reverse PGM
The reverse PGM is used to drive the fan in the reverse direction this will circulate air from the
floor and return this to the intake. In the reverse mode the temperature at the floor is above
the set point.
FN001 Reverse
pgm: --000:00
To modify the reverse PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Manual Forward PGM
The manual forward PGM is monitored by the floor temping function and if it is activated the
function will operate in forward mode regardless of the floor temperature setting.
FN001 Man Fwd
pgm: --000:00
To modify the Manual Forward PGM, use the settings as explained in section Entering PGM
and PGM Groups on Page 410.
Manual Reverse PGM
The manual reverse PGM is monitored by the floor temping function and if it is activated the
function will operate in reverse mode regardless of the floor temperature setting. If the
manual forward and reverse PGM’s are activated the floor tempering system will operate in
the forward mode and ignore the reverse PGM setting.
FN001 Man Rev
pgm: --000:00
To modify the Manual Reverse PGM, use the settings as explained in section Entering PGM
and PGM Groups on Page 410.
Cool On PGM
The cool on PGM is activated when the floor tempering has a requirement for cooling if the
floor tempering system does not have a cooling compressor do not set the cool on PGM.
Protégé Integrated System Controller Reference Manual
296