PRT CTRL Integrated Controller Reference Manual

To modify the cool 2 PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Cooling Stage 3 PGM
The cool 1 PGM is activated when the RTHP has a requirement for cooling and the cooling
stage demand value has been exceeded for the third stage. The cooling 3 PGM will typically
be used to control the third stage of the cooling system.
FN001 Cool 3
pgm: --000:00
To modify the cool 3 PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Cooling Stage 4 PGM
The cool 1 PGM is activated when the RTHP has a requirement for cooling and the cooling
stage demand value has been exceeded for the fourth stage. The cooling 4 PGM will typically
be used to control the fourth stage of the cooling system.
FN001 Cool 4
pgm: --000:00
To modify the cool 1 PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Heating Stage 1 PGM
The heat 1 PGM is activated when the RTHP has a requirement for heating and the heating
stage demand value has been exceeded for the first stage. The heating 1 PGM will typically be
used to control the first stage of the heating system.
FN001 Heat 1
pgm: --000:00
To modify the heat 1 PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Heating Stage 2 PGM
The heat 2 PGM is activated when the RTHP has a requirement for heating and the heating
stage demand value has been exceeded for the second stage. The heating 2 PGM will typically
be used to control the second stage of the heating system.
FN001 Heat 2
pgm: --000:00
To modify the heat 2 PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
287 Protégé Integrated System Controller Reference Manual