PRT CTRL Integrated Controller Reference Manual

Input One
Area Control
DISARM
Input One PGM
Input one selects the input source to the area control process that is being configured. All
area control functions use at least one input source. Input one must be programmed with a
valid input source, if an input source is selected that is not valid when the function is started
an error will be generated and the function suspended. An input source can be a PGM
(Programmable Output) or a Memory Register (Special area of memory that can be used
store values and monitor internal system functions).
FN001 Input one
pgm: --000:00
To modify the input PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Control Area
The control area selects the area to control as a result of the action being performed by the
programmable function. To control an area group leave the control area option set to none
and proceed to the Control Area Group. Selecting both an area and an area group will result
in only the area being controlled and the area group being ignored. Programming an area and
an area group will result in the area group not being used.
FN001 Area
None
Use the [1] and [3] keys to scroll the action types until you reach the required action that
you want to be performed and then press [ENTER] to proceed to the next programmable
option for the area control function. For more information about the list control data entry
refer to the section List Control Data Entry on Page 406.
Control Area Group
The control area group selects the area group to control as a result of the action being
performed by the programmable function. To control an area leave the control area group
section set to none and program an area in the control area section. Programming an area
and an area group will result in the area group not being used.
FN001 Area Grp
None
Use the [1] and [3] keys to scroll the area groups until you reach the required group and
then press [ENTER] to proceed to the next programmable option for the area control
function. For more information about the list control data entry refer to the section List
Control Data Entry on Page 406.
RTHP Control Function
Protégé Integrated System Controller Reference Manual
284