PRT CTRL Integrated Controller Reference Manual

Output PGM / Memory Register
Output PGM selects the PGM output to activate or deactivate as a result of the action being
performed by the logic process.
FN001 Output
pgm: --000:00
To modify the output PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Area Control Function
To program the area control function ensure that the function you have selected is halted.
Select the function type selection screen as shown below for Area Control.
FN001 Func Type
Area Control
Use the [1] and [3] keys to scroll the function types until you reach the area control selection
and press [ENTER] to select the function type displayed and proceed to the next
programmable option for the area control function. For more information about the list
control data entry refer to the section List Control Data Entry on Page 406.
Function Mode
The function mode determines how this function operates with the system controller. By
default a function is set to normal operation. Normal operation will mean the function is
started if it was running when the system restarts or is completely powered down (AC Failure
and Battery Failure). The Run Once mode of operation will allow the function to run once and
then wait to be stopped and started by the user or operator.
FN001 Func Mode
Normal
Use the [1] and [3] keys to scroll the function mode until you reach the normal selection and
press [ENTER] to proceed to the next programmable option for the area control function. For
more information about the list control data entry refer to the section List Control Data Entry
on Page 406.
Area Action
The action determines what action is performed on the area or area group that is
programmed as a result of the Input PGM. For key switch arming or simple arming of an area
from a zone input use the area control options in the zone type configuration. Refer to the
Zone Type Programming on Page XX.
FN001 Action
None
Use the [1] and [3] keys to scroll the action types until you reach the required action that
you want to be performed and then press [ENTER] to proceed to the next programmable
Protégé Integrated System Controller Reference Manual
282