01.07.2014 Views

PRT CTRL Integrated Controller Reference Manual

PRT CTRL Integrated Controller Reference Manual

PRT CTRL Integrated Controller Reference Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

FN001 Func Mode<br />

Normal<br />

Use the [1] and [3] keys to scroll the function mode until you reach the normal selection and<br />

press [ENTER] to proceed to the next programmable option for the logic control function. For<br />

more information about the list control data entry refer to the section List Control Data Entry<br />

on Page 406.<br />

Logic Action<br />

The logic action determines what logical operation or action is performed on the Inputs that<br />

are programmed in the following screens. There are eleven different options for the logical<br />

control function.<br />

FN001 Action<br />

None<br />

Use the [1] and [3] keys to scroll the logic action types until you reach the required action<br />

that you want to be performed and then press [ENTER] to proceed to the next programmable<br />

option for the logic control function. For more information about the list control data entry<br />

refer to the section List Control Data Entry on Page 406.<br />

Logic Action<br />

Follow and Test<br />

Description<br />

The output follows the programmed input one state and will<br />

retest the input state continually.<br />

Input One<br />

ON<br />

OFF<br />

Output<br />

ON<br />

OFF<br />

Test Action - If the output state is changed externally or is part of<br />

another programmable function the programmable function will<br />

only restore the output state after 30 seconds has elapsed. This<br />

time is only used if the programmable function was NOT<br />

responsible for the change in state.<br />

Not Follow and<br />

Test<br />

Performs the same function as above however the output is<br />

inverted (NOT). This logic action is a test action, consult the<br />

follow and test action for an explanation of the Test Function.<br />

Input One<br />

ON<br />

OFF<br />

Output<br />

OFF<br />

ON<br />

Pulse On<br />

The pulse on action will turn the output ON only when the input<br />

one has transitioned from an off to an on state. The output will<br />

not be modified further from this state and will not be modified if<br />

it is turned OFF by another function.<br />

Input One<br />

Output<br />

ON<br />

Not Pulse On<br />

The not pulse on action will turn the output OFF only when the<br />

input one has transitioned from an off to an on state. The output<br />

279 Protégé <strong>Integrated</strong> System <strong>Controller</strong> <strong>Reference</strong> <strong>Manual</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!