PRT CTRL Integrated Controller Reference Manual

• When the [ENTER] key is pressed a warning is immediately displayed to the user
with a rejection tone beep, to cancel press the [MENU] key or the [CLEAR] key to
log out.
This will reset
all panel data !
Upload the panel
to backup data.
Press [ENTER] to
continue.
Press [MENU] or
[CLEAR] to exit.
To continue with the default you must press the [ENTER] key, this will reset the
panel and setup the internal memory structures to the selected profile.
Programmable Function Configuration
Programmable functions are used to perform special processing of actions when a particular
event or operation occurs. For example resetting users anti-passback status to the unknown
state or controlling a group of doors.
To enter the programmable function menu login using a valid installer code and then select
[MENU, 4, 8, 4]. The screen displays “Service to modify” as shown in the following example.
Function to
modify: FN001
Functions are a vital component to the Protégé System and allow many variations of logic,
process and automation to be performed. Functions are small independent functions within
the protégé that are used to process information or perform specialized control functions.
When the functions appears on the screen, press [ENTER] to program the function. The
maximum number of functions that can be programmed is limited by your system’s memory
and configured profile.
Functions that attempt to perform circular referenced input and output (that is the
use of a PGM output to change the state of the same PGM output) will automatically
be halted and a programming error event will be generated.
Protégé Integrated System Controller Reference Manual
276