PRT CTRL Integrated Controller Reference Manual

Select zone to
view: CP001:01
Type the appropriate module type, module address and zone number or use the [] and []
keys to scroll the available zones. When the desired zone number appears on the screen,
press [ENTER] to view the selected zone number.
When selecting a Zone the zone address is entered using the Module Type, Module Address
and the number of the zone, this is called Protégé Object Notation.
Information on the Protégé Object Notation and how it applies to programmable objects
within the Protégé System refer to the Object Notation Section on Page 402.
Zone Status Display
When the zone is selected the name of the zone will be displayed on the top line and the state
of the zone will be shown on the bottom line.
Warehouse PIR
is TAMPERED
Use the [] and [] keys to scroll the available zones while in the view screen or press the
[] to return to the zone selection. Pressing the [ARM] key will toggle the display between
the name and the zone identification. Each zone is assigned a unique identification that uses
the Protégé Notation.
CP001:01 Zone
is TAMPERED
The display will show the zone state and will depend on the resistor configuration option
programmed for the zone that is being viewed. The possible states that can be displayed are;
OPEN
CLOSED
SHORT
TAMPERED
Zone is opened.
Zone is closed.
Zone is shorted out or a wiring fault has occurred.
Zone wiring is cut or faulty.
By default the zone name will be shown on the top line of the screen however if no name is
programmed or the name is blank it may be desirable to view the device and address of the
module that the zone is connected to. To view the input in the system it is connected on press
the [ARM] key, the [ARM] key can be pressed repeatedly to toggle between the two display
options.
Viewing Trouble Zones
To access the trouble zone view menu login using a valid installer code and then select
[MENU, 4, 8, 2, 1, 2]. The screen displays “Trouble zone to view” as shown in the following
example.
Trouble zone to
view: CP001:01
Protégé Integrated System Controller Reference Manual
272