PRT CTRL Integrated Controller Reference Manual

SV001 Ser Mode
Start with O/S
Use the [1] and [3] keys to scroll the available operating modes and press [ENTER] to select
the operating mode displayed. For more information about the list control data entry refer to
the section List Control Data Entry on Page 406.
Primary IP Address
The primary IP address is the IP of the Protégé System Controller that is being linked with.
SV001 Pri IP
000.000.000.000
To modify the IP address use the keypad as explained in section Entering Decimal Numbers
on Page 405. Press [ENTER] to save the Octet that is being entered and move to the next
Octet or the next screen once all four have been completed.
Primary Port
The primary port configures the TCP/IP port the two System Controllers will communicate
over.
SV001 Primary
port: 09647
To modify the port configuration use the keypad as explained in section Entering Decimal
Numbers on Page 405 and Press [ENTER] to save the modified data.
Polling Time
The polling time is set to schedule periodic connections with the other system controller.
SV001 Poll
time: 120 secs
Edit the polling time to a value of 10 to 255 seconds, any number below 10 will disable the
polling being sent to the controller. Use the keypad as explained in section Entering Decimal
Numbers on Page 405 and press [ENTER].
Function
The function defines how the service will operate; it can either send or receive data. When
set to Send Data the controller will inform the second controller of the PGMs being controller.
When set to Receive Data the controller will listen to the secondary controller and update it’s
PGM status according to the received values.
SV001 Function
Send Data
Use the [1] and [3] keys to scroll the available operating modes and press [ENTER] to select
the operating mode displayed. For more information about the list control data entry refer to
the section List Control Data Entry on Page 406.
255 Protégé Integrated System Controller Reference Manual