PRT CTRL Integrated Controller Reference Manual

To modify the line number, use the keypad as explained in section Entering Hexadecimal
Numbers on Page 408 and press [ENTER].
Encryption Type
When using the Armor-IP Reporting Protocols the encryption type must be set as instructed
by the monitoring station. To use no encryption set this to default.
SV001 Encryption
Default
Use the [1] and [3] keys to scroll the encryption type selection and press [ENTER] to select
the type displayed. For more information about the list control data entry refer to the section
List Control Data Entry on Page 406.
Encryption Key
When AES 128, 192 or 256 bit Encryption is selected this defines the AES key that is used.
This must be set as instructed by the monitoring station.
SV001 Crypt Key
To modify or enter a new key use the keypad as explained in section Entering Text and
Names on Page 406 and press [ENTER].
Link Me (IO)
The Link Me (IO) Service provides an interface for Protégé System Controllers to commicate
together through the linking of PGM outputs. This service maps PGMs on one System
Controller to a second System Controller so they follow the state of the primary System
Controller.
To program the Link Me Service ensure that the service that has been selected is halted.
Press the [ENTER] key until the display shows the service type selection screen.
SV001 Ser Type
Link Me (IO)
Use the [1] and [3] keys to scroll the service types until you reach the Link Me selection and
press [ENTER]. For more information about the list control data entry refer to the section List
Control Data Entry on Page 406.
Service Mode
The service mode determines how this service operates with the system controller. By default
a service is set to start with the operating system. Setting a service to "Start With The
Operating System" (Start With O/S) allows the service to operate automatically, if the system
controller is reset or restarts. Manual control of the service can be set by using the Manual
option for the service mode.
Protégé Integrated System Controller Reference Manual
254