PRT CTRL Integrated Controller Reference Manual

Disabled the dialer will not report restores.
Option 6 - Report Bypass
Enabled the service will report byapss's for the zones that are part of the
area group assigned. An area group of none will mean ALL areas will be sent
using this service.
Disabled the dialer will not report bypass's.
Option 7 and 8 - Reserved
Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
Data Options
The data options are used to log information that is received, make the DVACS service
respond to an all call code or respond to odd/even all call requests.
SV001 Data
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Log Acknowledge Events
Enabled the service will log acknowledge communication events.
Disabled the service will not log acknowledge communication events.
Option 2 - Log Poll Accept Events
Enabled the service will log and event when the polling has been accepted
by the remote host receiver.
Disabled the service will not log polling messages.
Option 3 – Log Communications Retry
Enabled the service will log a communications retry that occurs because of a
network failure or loss of service.
Disabled the service will not log communications retries.
Option 4 – Log Communications Failure
Enabled the service will log an event when communications have failed
completely and the service is waiting on another attempt.
Disabled the service will not log the communications failure.
Option 5, 6, 7 and 8 - Reserved
Protégé Integrated System Controller Reference Manual
252