PRT CTRL Integrated Controller Reference Manual

Service Mode
The service mode determines how this service operates with the system controller. By default
a service is set to start with the operating system. Setting a service to "Start With The
Operating System" (Start With O/S) allows the service to operate automatically, if the system
controller is reset or restarts. Manual control of the service can be set by using the Manual
option for the service mode.
SV001 Ser Mode
Start with O/S
Use the [1] and [3] keys to scroll the available operating modes and press [ENTER] to select
the operating mode displayed. For more information about the list control data entry refer to
the section List Control Data Entry on Page 406.
Reporting Protocol
The reporting protocol defines how the IP communication data will be sent to the monitoring
station. Various protocols are supported to allow the most comprehensive solution.
SV001 Format
Armour IP
Use the [1] and [3] keys to scroll the different protocols and press [ENTER] to select the
protocol displayed. For more information about the list control data entry refer to the section
List Control Data Entry on Page 406.
Protocol
Armor IP
CID Over IP
SIA Over IP
AlarmNZ IP
Patriot LS30
Function
Armor IP will communicate to the Armor IP server software
running on a remotely connected server. The Amour IP
Server provides a standard Ademco 685 output and allows
routing and redirection of signals to other reception devices
such as E-Mail, SMS Messaging and Websites. The Armor IP
software is designed to be used with a Concentrator
operating in the central station control room.
CID Over IP communicates a Contact ID message using the
SIA DC09 specification format to any receiver that supports
the SIA DC09 specification. SIA DC09 Specification is
currently not released as a formal specification and is
subject to change.
SIA Over IP communicates a SIA Level 2 message using the
SIA DC09 specification format to any receiver that supports
the SIA DC09 specification. SIA DC09 Specification is
currently not released as a formal specification and is
subject to change.
AlarmNZ IP is the IP Communication format used by Alarm
New Zealand Limited. By default the AlarmNZ IP service will
use the Contact ID reporting format. Information is sent
using a login and password and then event information in a
ASCII comma separated data format.
Patriot LS30 Protogol is the IP Communication format used
by Patriot Systems central station automation application.
By default the Patriot LS30 service will use a form of
Contact ID reporting. Information is sent using a
proprietary format and to obtain details the user should
Protégé Integrated System Controller Reference Manual
248