PRT CTRL Integrated Controller Reference Manual

SV001 Intercom 3
address: 255
To modify the intercom address (000 to 255, a setting of 255 will result in this address slot
being disabled), use the keypad as explained in section Entering Decimal Numbers on Page
405 and press [ENTER].
Intercom 4 Address
The intercom 4 address defines the address received by fourth intercom slot, up to 4
intercoms can be decoded simultaneously. In some instances certain intercoms are not able
to unlock a elevator floor. By configuring the intercom address only the intercoms that are to
be used for elevator access are able to be decoded.
SV001 Intercom 4
address: 255
To modify the intercom address (000 to 255, a setting of 255 will result in this address slot
being disabled), use the keypad as explained in section Entering Decimal Numbers on Page
405 and press [ENTER].
Elevator Group
The elevator group that is assigned to this service will be sent the floor group that is
programmed in the user access level settings. The elevator group settings in a user are
ignored as they may have more elevators available which are not be controlled by the
intercom system.
In the case where a bank of 3 elevators are being controlled the elevator group would have
the 3 elevators selected in the elevator group. This will result in the floor assigned in the
access level of the intercom user being sent to all the elevators in the group.
SV001 Elv Group
None
Use the [1] and [3] keys to scroll the elevator group setting and press [ENTER] to select the
elevator group displayed. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406.
Door Group
The door group that is assigned to this service will be unlocked when a valid user is found.
This action is independent of the elevator function. The user does not need to have the doors
that are assigned in this door group in the door group assigned to their access level. The door
group will be unlocked independent of a user setting.
The doors in the door group will be unlocked for the duration of the door lock time setting in
each door.
This allows a user to activate the intercom have access granted from the phone system and
then the access control system grant access, allowing an event log to be generated of who let
someone in to a foyer door, additionally this information can be posted to a DVR or Text
Capture software application.
Protégé Integrated System Controller Reference Manual
244