PRT CTRL Integrated Controller Reference Manual

Communications Port Number
The communications interface port defines which serial port the controller will use for
communication with the intercom that has been configured. Select the communication port
that will be plugged in to the intercoms communication interface or RS232 connection.
SV001 Port
Ext Port 1
Use the [1] and [3] keys to scroll the communication ports and press [ENTER] to select the
operating mode displayed. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406.
Communications Port Speed
The communications port speed defines the baud rate at which the Intercom Interface
operates. The default value is 9600 bits per second. If the speed or configuration is different
adjust this setting to suit the type of intercom that has been selected configuration.
SV001 Speed
9600
Use the [1] and [3] keys to scroll the communication port speed options and press [ENTER]
to select the speed displayed. For more information about the list control data entry refer to
the section List Control Data Entry on Page 406.
Communications Port Parity
The communications port parity defines the parity configuration for the communication with
the Intercom. This will default to No Parity however this can be adjusted to suit the intercom
that has been configured.
SV001 Parity
No Parity
Use the [1] and [3] keys to scroll the communication parity options and press [ENTER] to
select the parity displayed. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406.
Data Options
The data options configure various communication settings that affect the operation of the
Intercom Interface protocol.
SV001 Data
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 – Log Communication Events
Enabled the service will log communication events that occur on the
Intercom Communications and store these to the event buffer. It is
recommended this is only turned on for commissioning purposes as a large
Protégé Integrated System Controller Reference Manual
242