PRT CTRL Integrated Controller Reference Manual

SV001 Parity
No Parity
Use the [1] and [3] keys to scroll the communication parity options and press [ENTER] to
select the parity displayed. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406.
Data Options
The data configure various communication settings that affect the operation of the Clipsal C-
Bus Interface protocol.
SV001 Data
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 – Log Communication Events
Enabled the service will log communication events that occur on the C-Bus
System to the event buffer. It is recommended this is only turned on for
commissioning purposes as a large number of events can be generated.
Disabled the communication events will not be logged.
Option 2 – Log Communication Errors
Enabled the service will log C-Bus Communication errors that occur which
relate to the PCI not being present or not accepting commands.
Disabled the errors will not be logged and requests that generate errors will
be silently discarded.
Option 3,4,5,6,7 and 8 - Reserved
Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
PCI Fail Time
The PCI fail time allows a timer to be triggered on each successful request from the C-Bus
Clipsal PCI Interface. When this timer expires the system will perform a check to see if the
PCI is still present and then activate the fail PGM output if a response is not received.
SV001 PCI fail
time: 120 secs
To modify the fail time (000 to 255, a setting of 000 will result in the default of 120 seconds
being used), use the keypad as explained in section Entering Decimal Numbers on Page 405
and press [ENTER].
239 Protégé Integrated System Controller Reference Manual