PRT CTRL Integrated Controller Reference Manual

Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
When setting the all call options in the data configuration for DVAC only enable one
of the available options. Setting more than one of the all call options will result in
the first option that is set being used.
Miscellaneous Options
The miscellaneous options are current reserved.
SV001 Misc
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1,2,3,4,5,6,7 and 8 - Reserved
Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
Area Group
An area group will define which areas this service will process when a reportable event is
generated. An area group of None (default) will result in all areas being sent with the service.
SV001 Area Grp
None
Use the [1] and [3] keys to scroll the area group selection and press [ENTER] to select the
area group displayed. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406.
Reporting Table
With the size of the protégé system the maximum reporting points available in the DVAC
service format is easily exceeded, to allow flexibility a reporting table has been created to
allow information to be sent using pre-defined zone numbers or values. There are 2
predefined configurations for the reporting tables.
SV001 Reporting
table: 000
To modify the port open attempts (000 to 255), use the keypad as explained in section
Entering Decimal Numbers on Page 405 and press [ENTER].
Fail To Poll Time
The fail to poll time allows a timer to be triggered on each successful poll from the DVAC's
network. This is also used to generate the DVAC service fail to poll trouble zone which can be
Protégé Integrated System Controller Reference Manual
232