PRT CTRL Integrated Controller Reference Manual

Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
Data Options
The data options are used to log information that is received, make the DVACS service
respond to an all call code or respond to odd/even all call requests.
SV001 Data
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Log Communication Events
Enabled the service will log communication events that occur. Please be
aware that when used with a polling service such as DVAC's will fill the
event buffer with a significant amount of data and should only be used for
testing and configuration purposes.
Disabled the service will not log communication events.
Option 2 - Log DVAC Messages
Enabled the service will log messages that are sent from the DVAC's
network and store these in the event log. Once again this will result in a
large number of events being saved.
Disabled the service will not log DVAC messages.
Option 3 - Respond All Call Command A
Enabled the service will send an event if it has one ready when the DVAC's
host requests an All Call A command.
Disabled the service will not respond to an All Call Command A.
Option 4 - Respond All Call Command B
Enabled the service will send an event if it has one ready when the DVAC's
host requests an All Call B command.
Disabled the service will not respond to an All Call Command B.
Option 5 - Respond All Call Odd/Even Address
Enabled the service will send an event if it has one ready when the DVAC's
host requests an All Call A command and the device address is an Odd
Address or if the requests an All Call B command and the device address is
an Even Address.
Disabled the service will not respond to an Odd/Even All Call Command.
Option 6, 7 and 8 - Reserved
231 Protégé Integrated System Controller Reference Manual