PRT CTRL Integrated Controller Reference Manual

Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
Data Options
The data options are currently reserved and should not be modified from their default
settings.
SV001 Data
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1, 2, 3, 4, 5, 6, 7 and 8 - Reserved
Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
Miscellaneous Options
The miscellaneous options allow you to program special functions and features for the SIA
reporting format.
SV001 Misc
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Log Modem Service Events
Enabled the service will provide step by step event information showing the
call progression and detailed logging information. This option can be turned
on for diagnostic purposes but should not be enabled as large volumes of
events will be generated.
Disabled the dialer will not log call progression events.
Option 2 - 4 Digit Point Reporting Codes
Enabled the SIA service will use a 4 digit reporting code for the client, the
SIA standard supports 6 digits however some receivers do not comply with
the full SIA specification or the automation software connected limits the
acceptance of large point numbers. Verify the configuration of the receiver
with the monitoring company prior to setting these options.
If a 4 Digit Account is to be used program the last 4 digits of the
account code with the account ID. For example if you are reporting
to account code 9712 program the SIA account code as 009712.
Disabled the SIA service will send 6 digit point codes.
Option 3 - Pad Area Account Code To 6 Digits
Protégé Integrated System Controller Reference Manual
224