PRT CTRL Integrated Controller Reference Manual

Use the [1] and [3] keys to scroll the available phone numbers and press [ENTER] to select
the phone number displayed. To program a phone number select [MENU, 4, 7, 2]. For more
information about the list control data entry refer to the section List Control Data Entry on
Page 406.
Phone Number One
The primary phone number will be dialed by the SIA service when it first is initiated to report
an event. The sequence of telephone number dialling is limited by the number of dialling
attempts and the method of dialling that is configured (alternate or sequential).
SV001 Phone 1
None
Use the [1] and [3] keys to scroll the available phone numbers and press [ENTER] to select
the phone number displayed. To program a phone number select [MENU, 4, 7, 2]. For more
information about the list control data entry refer to the section List Control Data Entry on
Page 406.
Phone Number Two
The secondary phone number will be dialed by the SIA service if a connection with the central
station can not be made on the primary phone number. This may be dialled after the total
number of attempts is reached on the primary or until the total number of attempts is
reached for the primary and secondary numbers. The sequence of telephone number dialling
is limited by the number of dialling attempts and the method of dialling that is configured
(alternate or sequential).
SV001 Phone 2
None
Use the [1] and [3] keys to scroll the available phone numbers and press [ENTER] to select
the phone number displayed. To program a phone number select [MENU, 4, 7, 2]. For more
information about the list control data entry refer to the section List Control Data Entry on
Page 406.
Backup Phone Number
The backup phone number will be dialed by the SIA service if a connection with the central
station can not be made on either of the programmed phone numbers. This will be dialled
after the total number of attempts is reached. The backup number will be dialled for the
configured number of dialling attempts programmed for the service. For information on the
dialling sequence refer to the section sequential dialling attempts on page XX and alternate
dialling attempts on page XX.
SV001 Backup
None
Use the [1] and [3] keys to scroll the available phone numbers and press [ENTER] to select
the phone number displayed. For more information about the list control data entry refer to
the section List Control Data Entry on Page 406.
221 Protégé Integrated System Controller Reference Manual