PRT CTRL Integrated Controller Reference Manual

SV001 Server
port: 10002
To modify the TCP/IP port (00000 to 65535), use the keypad as explained in section Entering
Decimal Numbers on Page 405 and press [ENTER].
Transmit Threshold
The transmit threshold configures the service with the number of events that need to be
generated before they are transmitted to the Protégé Management Suite. Leave this set to
001 to have events sent immediately.
SV001 Transmit
threshold: 001
To modify the threshold (000 to 255), use the keypad as explained in section Entering
Decimal Numbers on Page 405 and press [ENTER].
Poll Time
The poll time configures the number of seconds between each poll event when the service is
configured to send poll events.
SV001 Poll
time: 090 secs
To modify the poll time (000 to 255), use the keypad as explained in section Entering Decimal
Numbers on Page 405 and press [ENTER].
Encryption
All events sent back to the Protégé System Management Suite when the controller is not
connected are encrypted. This parameter defines the type of encryption that is used.
SV001 Encryption
Default
Use the [1] and [3] keys to scroll the available parity and press [ENTER] to select the
encryption displayed. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406.
Encryption Key
When AES 128, 192 or 256 bit Encryption is selected this defines the AES key that is used.
SV001 Crypt Key
To modify or enter a new key use the keypad as explained in section Entering Text and
Names on Page 406 and press [ENTER].
Protégé Integrated System Controller Reference Manual
216