PRT CTRL Integrated Controller Reference Manual

poll events are sent to the secondary IP address as poll events are used to
prove the primary connection is active.
Disabled the service will not backup to the secondary IP address on
communication failure.
Option 8 – Backup to Monitor Phone
Enabled the service will attempt to send events to the server using a
monitor phone service (the first available service) if communication fails on
the primary IP address.
Disabled the service will not backup to the monitor phone service on
communication failure.
Server IP Address
The Server IP Address is the IP address of the Protégé System Management Suite that the
Controller reports events to when the server is not connected.
SV001 Server IP
000.000.000.000
To modify the IP address use the keypad as explained in section Entering Decimal Numbers
on Page 405. Press [ENTER] to save the Octet that is being entered and move to the next
Octet or the next screen once all four have been completed.
Server Port
The server port configures the service with the remote port number to communicate on.
SV001 Server
port: 10002
To modify the TCP/IP port (00000 to 65535), use the keypad as explained in section Entering
Decimal Numbers on Page 405 and press [ENTER].
Backup IP Address
The Backup IP Address is the Backup IP address of the Protégé System Management Suite
that the Controller reports events to when the server is not connected. Note that this is not a
separate server, rather an alternate path for communicating with the server.
SV001 Backup IP
000.000.000.000
To modify the IP address use the keypad as explained in section Entering Decimal Numbers
on Page 405. Press [ENTER] to save the Octet that is being entered and move to the next
Octet or the next screen once all four have been completed.
Backup Port
The backup port configures the service with the remote port number to communicate on.
215 Protégé Integrated System Controller Reference Manual