PRT CTRL Integrated Controller Reference Manual

for a list of trouble zones refer to the trouble zone section on page XX.
Only telephone line 1 (T1 and R1) can be monitored for telephone line or
loop failures.
Disabled the service will not monitor the telephone line.
Option 2 - Answer Machine Override
Enabled the service will use the answer/fax machine override function.
Disabled the service will answer the line based on the programmed number
of rings to answer.
Option 3 - Call Back Security On Connection Request
Enabled the service will allow a remote communication connection to login
and will then call the connecting party back using the PC phone number
programmed in the service.
Disabled the service will not use call back security.
Option 4 - Call Back On Event Buffer (75%)
Enabled the service will call the PC phone number programmed in the
service when the total number of events that have not been enabled
reaches 75% of the total available events.
Disabled the service will not call back.
Option 5 - Log Modem Service Events
Enabled the service will provide step by step event information showing the
call progression and detailed logging information. This option can be turned
on for diagnostic purposes but should not be enabled as large volumes of
events are stored.
Disabled the dialer will not log events.
Option 6 - Reserved
Reserved.
Reserved.
Option 7 - Reserved
Reserved.
Reserved.
Option 8 - Answer ModBUS Remote Receiver Mode
Enabled the service will answer the phone line and wait for a ModBUS
remote communication connection. Setting this option will disable the ability
to log in to the panel using the protégé system management suite. This
option should only be enabled for the ModBUS remote receiver unit. For
information on the ModBUS remote communication operation refer to the
PRT-CTRL ModBUS Remote and Slave Communication Protocol Reference
Protégé Integrated System Controller Reference Manual
210