PRT CTRL Integrated Controller Reference Manual

the report was completed. Using this feature with the shorten exit delay for an area allows an
end user to verify the communication path on arming of the building
SV001 Report Ok
pgm: --000:00
To modify the report ok PGM, use the settings as explained in section Entering PGM and PGM
Groups on Page 410.
Monitor Phone Service
To program the monitor phone service ensure that the service that has been selected is
halted. Press the [ENTER] key until the display shows the service type selection screen.
SV001 Ser Type
Monitor Phone
Use the [1] and [3] keys to scroll the service types until you reach the monitor phone
selection and press [ENTER] to select the monitor phone service type displayed and proceed
to the next programmable option for the monitor phone service. For more information about
the list control data entry refer to the section List Control Data Entry on Page 406.
Service Mode
The service mode determines how this service operates with the system controller. By default
a service is set to start with the operating system. Setting a service to Start With The
Operating System (Start With O/S) allows the service to operate automatically, if the system
controller is reset or restarts the service will automatically restart with the operating system.
To stop and start the service manually and to prevent the service from restarting when a
reset condition occurs select manual operation.
SV001 Ser Mode
Start with O/S
Use the [1] and [3] keys to scroll the available operating modes and press [ENTER] to select
the operating mode displayed. For more information about the list control data entry refer to
the section List Control Data Entry on Page 406.
Miscellaneous Options
The miscellaneous options allow you to program special functions and features for the monitor
phone service.
SV001 Misc
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Telephone Line Monitoring
Enabled the service monitor the telephone line for a disconnection or out of
tolerance loop value. The TLM failure will open the phone line trouble zone,
209 Protégé Integrated System Controller Reference Manual