PRT CTRL Integrated Controller Reference Manual

Contact ID
Monitor Phone
Protégé SMGT
Serial Printer
SIA (Level 2)
AMX
DVAC (Surgard)
ModBUS (Slave)
ModBUS
(Remote)
Sends alarms, tests and events using the Contact
ID reporting format to a monitoring station capable
of receiving the Contact ID format. This service will
share the modem with the SIA, Monitor Phone and
ModBUS remote services if they are running.
Monitors the onboard modem for incoming
upload/download connections, performs line fault
monitoring and pc callback functions.
This service will share the modem with the Contact
ID, SIA and ModBUS Remote and other services
that use the onboard modem if they are running.
A direct communication protocol that allows the
controller to communicate at high speed with the
Protégé System Management Suite.
Prints events to a standard serial communication
port. Can be programmed to only print specific
event groups or events from a specific area. Option
to send Hexadecimal Events and PC
acknowledgement functions for use with Third
Party OEM event retrieval systems.
Sends alarms, tests and events using the SIA Level
2 reporting format to a monitoring station capable
of receiving the SIA Level 2 format. This service
will share the modem with the Contact ID, Monitor
Phone and ModBUS remote services if they are
running.
Automation control protocol for use with the AMX
automation product range. AMX Specialises in
home and theatre control systems amx.com for
more information.
Used to report over the DVAC hard line
communication link using the Surgard Receiver
protocol. Reports alarms, test and activity in the
system. Monitors locally the polling and link status.
The availability of a DVAC hard line is dependent
on the location of the installation.
The ModBUS slave protocol allows the
communication and control of objects (Zones,
Areas, PGM's, Doors etc..) from a standard
industrial automation package such as Citect,
Wonderware, The FIX and DAQ Factory. There are
many other products that support the ModBUS
protocol and will communicate with the Protégé
System.
The ModBUS remote protocol communicates with a
remote Protégé System using intelligent ondemand
reporting for large scale, wide area
monitoring using a standard SCADA package while
adding the ability to protect and control access to
the remote outstation.
The C-Bus protocol allows the communication and
control of objects (Zones, Areas, PGM's, Doors
etc..) from the Clipsal C-Bus products.
ONBOARD
MODEM
ONBOARD
MODEM
COM1, COM2,
COM3, COM4,
TCP/IP
COM1, COM2,
COM3, COM4,
TCP/IP
(10000) and
TCP/IP
(10001)
ONBOARD
MODEM
COM1, COM2,
COM3, COM4,
TCP/IP
COM1, COM2,
COM3, COM4
COM1, COM2,
COM3, COM4,
TCP/IP
(10000) and
TCP/IP
(10001)
ONBOARD
MODEM
Clipsal C-Bus
Automation
COM1, COM2,
COM3, COM4,
TCP/IP
(10000) and
TCP/IP
(10001)
Intercom High The Intercom service provides a high level COM1, COM2,
Protégé Integrated System Controller Reference Manual
200