PRT CTRL Integrated Controller Reference Manual

Use the [1] and [3] keys to scroll the reader in modes and press [ENTER] to select the mode
displayed. For more information about the list control data entry refer to the section List
Control Data Entry on Page 406.
Anti Pass Back Exit Operation Mode
The reader anti pass back operation mode determines how an exit reader controls the ability
for a user to pass back their card or details for another person to gain access while they are
already inside a protected area. The Protégé System use's global anti pass back per
controller.
Selecting soft pass back will allow the user to exit however it will log an error in the buffer
that a pass back violation has occurred. Selecting hard pass back will prevent the user from
exiting the area and also log an event.
DT001 Pass Out
None
Use the [1] and [3] keys to scroll the anti pass back modes and press [ENTER] to select the
mode displayed. For more information about the list control data entry refer to the section
List Control Data Entry on Page 406.
Entry Options
Entry options for the door type are currently all reserved and perform no function.
DT001 Entry
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1, 2, 3, 4, 5, 6, 7 and 8 - Reserved
Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
Exit Options
Exit options for the door type are currently all reserved and perform no function.
DT001 Exit
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1, 2, 3, 4, 5, 6, 7 and 8 - Reserved
Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
185 Protégé Integrated System Controller Reference Manual