PRT CTRL Integrated Controller Reference Manual

Selecting a Door Type to Modify
Each door type is assigned a unique door type number from 001 to 064. Your system will be
limited to specific number of door types that are defined in the selected profile. For
information on profiles refer to the Advanced Programming Section on Page 265.
Door type to
modify: DT001
Type the appropriate 3-digit door type number or use the [] and [] keys to scroll the
available door type numbers. When the desired door type number appears on the screen,
press [ENTER] to program the selected door type number. The maximum number of door
types that can be programmed is limited by your system’s memory and configured profile.
It is recommended NOT to modify the door types DT001 to DT004. These are
assigned by default to all doors. When scheduling door type operation or altering
default settings use the door types from DT005 and above.
Door Type Name
If the selected door type has a name associated (some door types do not have a name
associated with them) the name programming screen will be shown.
DT001 Name
Card Only
To scroll door types by name use the [] and [] keys. To modify or enter a new name for
the selected door type use the keypad as explained in section Entering Text and Names on
Page 406 and press [ENTER].
By default the door type name will be prefixed by an '*' this indicates that the name is an
editable name in the system. Some door types do not have names, this is limited by the
system memory and the profile configured.
Operational Schedule
The door type schedule allows a door type to be scheduled for use during a certain time
period. For example setting a door type schedule for card only from between 9am and 5pm
and then a secondary door type of Card and Pin will mean during the hours of 9am and 5pm
any door assigned the door type will require card only access during 9am and 5pm however
outside this time will require a card access and pin number. Use this option to increase the
security of the main entry doors after hours while maintaining a faster traffic flow during
working hours.
DT001 Schedule
None
Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the
schedule displayed. For more information about the list control data entry refer to the section
List Control Data Entry on Page 406.
If a schedule is selected and no secondary door type is programmed all doors that are
assigned this door type will not function when the schedule becomes invalid.
183 Protégé Integrated System Controller Reference Manual