PRT CTRL Integrated Controller Reference Manual

Enabled the door will prevent any exit if the outside area is armed.
Disabled the outside area will not affect the access decision.
Option 6 – Disable Door Open Alarms if unlocked on Schedule, Latch or Area Status
Enabled the door will not generate the door left open alarm events to the
reader expanders beeper and led ports if they are programmed. This allows
a door to be “propped” open during normal opening times however a prealarm
warning will still be generated.
This option DOES NOT prevent the door left open trouble zone from
being sent to the monitoring station if reporting on the trouble zone
is programmed to be generated. To prevent the door open alarms
from being sent schedule the zone type for the door open alarm
events to operate without reporting during the day.
Disabled the door open alarm events operate normally.
Option 7 – Prompt User Access Type
Enabled the user will be prompted on the reader expanders ascociated
keypad to enter their reason for access. The user must enter the reason
before access will be granted.
Disabled no prompt will be displayed.
Option 8 - Generate User Access Taken Events
Enabled the door will generate a User Access Taken event if the door opens
while the door is unlocked after entry has been granted. If the door
remains closed an Access Not Taken event will be generated.
Disabled no event will be generated.
It is recommended not to enable/disable or modify the settings of reserved options.
Door Type
Each door type is assigned a unique door type address. There are four default door types that
will cover nearly all the configurable options. To access door type programming, login using a
valid code that has access to the door type programming menu and then select [MENU, 5,
2]. The screen will then prompt you to "Select a door type to modify" requesting that you
enter a door type number. Type the appropriate 3-digit door type number or use the [] and
[] keys to scroll the available door types.
Door type to
modify: DT001
When the desired door type number appears on the screen, press [ENTER] to program the
selected door type. The maximum number of door types that can be programmed is limited
by your system’s memory and configured profile.
To browse the door types by name press [ENTER] when prompted for a door type number to
modify and then use the [] and [] keys to scroll the available door types by their name.
Protégé Integrated System Controller Reference Manual
182