PRT CTRL Integrated Controller Reference Manual

If there is no schedule programmed and the door is to follow the
area status you must set the OR option to enable the area status to
be processed. You also MUST select an inside or outside area.
Disabled the door will perform no OR logic processing for the schedule and
area status.
Option 8 – Generate REX/REN Access Taken Events
Enabled the door will generate a Request to Exit (or Enter) event if the door
opens while the door is unlocked from a request to exit. If the door remains
closed an Access Not Taken event will be generated
Disabled no event will be generated.
It is recommended not to enable/disable or modify the settings of reserved options.
Extra Options
Extra options include only the user area control option with most of these being reserved.
DR001 Extra
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Update User Area When Door Has No Anti Pass Back
Enabled the door will update the users current area even if the door is not
programmed with card anti pass back. This can be used to keep track of the
user's last area that they entered.
Disabled the users area will not be modified if the door is not programmed
for card anti pass back control.
Option 2 – Prevent Request To Exit If Inside Area Armed
Enabled the door will deny a request to exit when the inside area has been
armed to prevent egress from an armed area.
Disabled the request to exit operates during any inside area state.
Option 3 – Enable ADA Lock Output
Enabled the door will multiply the lock output time by two for any user that
has been tagged as an ADA (American Disabilities Act) user allowing an
extended amount of time for access and door left open.
Disabled the ADA option has no affect on the door lock time.
Option 4 – Deny Entry if Inside Area Armed
Enabled the door will deny any entry if the inside area is armed.
Disabled the inside area will not affect the access decision.
Option 5 – Deny Exit if Outside Area Armed
181 Protégé Integrated System Controller Reference Manual