PRT CTRL Integrated Controller Reference Manual

Enabled the door will not log a door opened event when it is unlocked on
schedule. This will prevent the door from filling the event buffer with events
that are not needed.
Disabled the door will generate a door open and close.
Option 3 - Generate Door Pre-Alarm Event
Enabled the door will generate a pre-alarm event when the pre-alarm timer
for the door is reached.
Disabled no pre-alarm event will be generated.
Option 4 - Generate Door Left Open Event
Enabled the door will generate a door left open event when the door
maximum open time is reached.
Disabled no left open event will be generated.
Option 5 - Relock Door When Closed
Enabled the door will lock when it detects a door close event and the lock
output is activated.
Disabled the relock function will not control the door.
Option 6 - Unlock Request To Exit (REX)
Enabled the door will activate the lock PGM when a request to exit occurs.
Disabled the door will not control the lock PGM.
Option 7 - Unlock Request To Enter (REN)
Enabled the door will activate the lock when a request to enter occurs.
Disabled the door will not control the lock PGM.
Option 8 - Late Open Schedule
Enabled the Door will not unlock on schedule until the first access has been
accepted at the door.
Disabled the first user in will not prevent the schedule from operating and
will activate the door if programmed normally.
It is recommended not to enable/disable or modify the settings of reserved options.
Special Options
Special options for the door include the control of the door from the inside and outside areas.
DR001 Special
[--------]
179 Protégé Integrated System Controller Reference Manual