PRT CTRL Integrated Controller Reference Manual

a suitable schedule here. Using the unlock on late control option prevents the door unlocking
on schedule until the first user access the door.
DR001 Lock Sch
None
Use the [1] and [3] keys to scroll the unlock schedule selection and press [ENTER] to select
the schedule displayed. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406.
Unlock Time
The unlock time determines how long the lock that controls the door will remain unlocked for
when a user access's the door.
DR001 Unlock
time: 005 secs
To modify the unlock time (000 to 255 Seconds), use the keypad as explained in section
Entering Decimal Numbers on Page 405 and press [ENTER]. Setting a 000 value will result in
the door not unlocking when a users access's the door.
Pre-Alarm Time
The pre-alarm time is programmed to allow the door to be left open for a certain period
before it will generate a pre-alarm condition. When the pre-alarm condition is reached this will
typically activate a PGM on the PRT-RDI2 that is controlling the door.
DR001 Pre-Alarm
time: 030 secs
To modify the pre-alarm time (000 to 255 Seconds), use the keypad as explained in section
Entering Decimal Numbers on Page 405 and press [ENTER]. Setting a 000 value will result in
the pre-alarm feature not operating.
Maximum Door Open Time
The maximum door open time when it is reached will generate a door left open alarm
activating the appropriate trouble zone and PGM output on the PRT-RDI2 that is controlling
the door.
The default configuration will mean that the door will generate a left open alarm 15 seconds
after the pre-alarm condition. For the trouble zones to activate they must be set in the reader
expander.
DR001 Max Open
time: 045 secs
To modify the maximum door open time (000 to 255 Seconds), use the keypad as explained
in section Entering Decimal Numbers on Page 405 and press [ENTER].
175 Protégé Integrated System Controller Reference Manual