PRT CTRL Integrated Controller Reference Manual

DR001 Slave
None
Use the [1] and [3] keys to scroll the slave door selection and press [ENTER] to select the
slave door displayed. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406. Setting a slave door that is the same as the door
being programmed will have no affect.
Interlocking Group
The interlocking group is assigned to a door that can not opened or accessed when any of the
doors assigned in the interlocking group are not secure. Access will be denied to the user
based on an interlock.
DR001 Interlock
None
Use the [1] and [3] keys to scroll the interlock door group selection and press [ENTER] to
select the interlock door group displayed. For more information about the list control data
entry refer to the section List Control Data Entry on Page 406.
Inside Area
The inside area defines which area is on the inside of this door. This is used to prevent a user
from gaining access to a door when the area is armed and they can not disarm it as well as
automatically disarming the area when the door is accessed. Using the door and area control
integrates the two systems and is an ideal solution to false alarm prevention.
DR001 Inside
None
Use the [1] and [3] keys to scroll the inside area selection and press [ENTER] to select the
inside area displayed. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406.
Outside Area
The outside area defines which area is on the outside of this door. This is used to prevent a
user from gaining access to a door when the area is armed and they can not disarm it as well
as automatically disarming the area when the door is accessed. Using an inside and an
outside area usually requires that the door is programmed with both an entry and exit reader.
DR001 Outside
None
Use the [1] and [3] keys to scroll the outside area selection and press [ENTER] to select the
outside area displayed. For more information about the list control data entry refer to the
section List Control Data Entry on Page 406.
Lock Schedule
The lock schedule determines when this door will unlock at a scheduled time. For example an
employee entry door may require to be unlocked at 7am and locked at 5pm you would assign
Protégé Integrated System Controller Reference Manual
174