PRT CTRL Integrated Controller Reference Manual

Enabled the area will report the activation of an entry zone immediately
event though the alarm may be in an entry delay operation.
Disabled the area will report entry zones if the entry delay times out and
the alarm activates.
Option 8 - Clear Area Count On Arming
Enabled the area will clear the count setting in the area to 0 when the area
is armed.
Disabled the area does not change the count setting when it is armed.
It is recommended not to enable/disable or modify the settings of reserved options.
Area Arming Options
Arming options for the area include the settings for the stay, force and instant arming options
as well as some count options and banking industry options.
AR001 Arming
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Stay Arm
Enabled the area can be stay armed.
Disabled the area can not be stay armed.
Option 2 - Force Arm
Enabled the area can be force armed.
Disabled the area can not be force armed.
Option 3 - Instant Arm
Enabled the area can be instant armed.
Disabled the area can not be instant armed.
Option 4 - Prevent Arming If Trouble Condition
Enabled the area will be prevented from arming if a trouble condition is
present in the system.
Disabled the area will arm regardless of the trouble condition.
Option 5 - Banking Vault Control Area
Enabled the area is used to control a vault area.
Disabled the does not control a vault area.
Protégé Integrated System Controller Reference Manual
168