PRT CTRL Integrated Controller Reference Manual

Area Reporting Options
Reporting options for the area include the settings for the reporting events and some specific
options for the control counting options.
AR001 Report
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Report Closing (Arming) Area
Enabled the area will generate a reportable event that can be directed to a
monitoring station.
Disabled the area will not generate an event when it is closed (armed).
Option 2 - Report Opening (Disarming) Area
When enabled the area will generate a reportable event that can be sent to
a monitoring station.
Disabled the area will not generate an event when it is opened (disarmed).
Option 3 - Report Control of the 24HR Tamper Area
Enabled the area will report both an opening (Disabled) or closing
(Enabling) of the 24HR section of this area.
Disabled the 24HR Tamper Area will not report any enable or disable
messages.
Option 4 - Report Bypassed Zones
Enabled the area will report all zones that are bypassed once it completes
the arming process.
Disabled the area will not report any bypass zones.
Option 5 - User Counting
Enabled the users that access this area will be counted using the area
counting function.
Disabled the area will not perform any counting.
Option 6 - Arm On Count Reaching 0
Enabled the area will arm when the count in the area reaches the terminal 0
count.
Disabled the area will not perform any function on the count reaching 0.
Option 7 - Report Entry Zones Immediately
167 Protégé Integrated System Controller Reference Manual