PRT CTRL Integrated Controller Reference Manual

AR001 Bell
time: 000 off
To modify the pulse on time (000 to 255 100ms Increments), use the keypad as explained in
section Entering Decimal Numbers on Page 405 and press [ENTER].
Both the on and off pulse settings must have a value greater than 000 for this feature to
operate.
Entry Delay PGM or PGM Group
You can assign a entry delay PGM or PGM group to activate whenever the area starts an entry
delay cycle. The entry delay PGM or PGM Group will be deactivated when the area is disarmed
during the entry delay period or the area activates the alarm due to the entry delay timing
out.
AR001 Entry
pgm: --000:00
To modify the Entry Delay PGM or PGM Group, use the settings as explained in section
Entering PGM and PGM Groups on Page 410.
Entry Delay PGM Pulse ON Time
The entry delay PGM pulse on time is used to make the PGM output pulse on and off when
activated. The value entered here must be greater than 0 and is in increments of 100ms. For
example setting 10 will pulse the unit on for 1 second and then off for the programmed time
set in the pulse off section.
AR001 Entry
time: 000 on
To modify the pulse on time (000 to 255 100ms Increments), use the keypad as explained in
section Entering Decimal Numbers on Page 405 and press [ENTER]. Both the on and off pulse
settings must have a value greater than 000 for this feature to operate.
Entry Delay PGM Pulse OFF Time
The entry delay PGM pulse off time is used to make the PGM output pulse on and off when
activated. The value entered here must be greater than 0 and is in increments of 100ms. For
example setting 10 will pulse the unit off for 1 second and then on for the programmed time
set in the pulse on section.
AR001 Entry
time: 000 off
To modify the pulse on time (000 to 255 100ms Increments), use the keypad as explained in
section Entering Decimal Numbers on Page 405 and press [ENTER].
Both the on and off pulse settings must have a value greater than 000 for this feature to
operate.
Protégé Integrated System Controller Reference Manual
156