PRT CTRL Integrated Controller Reference Manual

AR001 Name
*Area 001
To scroll areas by name use the [] and [] keys. To modify or enter a new name for the
selected area use the keypad as explained in section Entering Text and Names on Page 406
and press [ENTER].
By default the area name will be prefixed by an '*' this indicates that the name is an editable
name in the system. Some areas do not have names, this is limited by the system memory
and the profile configured.
Area Entry Delay Time
Setting an entry delay time for the area allows users that have entered a secured point to
have time to disarm the area before the area generates an alarm. Only zones that have a
zone type assigned with an entry delay option set will start the entry delay timer for the area.
AR001 Entry
time: 060 secs
To enter a entry delay time (000 to 250), use the keypad as explained in section Entering
Decimal Numbers on Page 405 and press [ENTER].
Area Exit Delay Time
Setting an exit delay time for the area allows users to exit the area once the arming of the
area has begun without triggering an alarm. Zones that are part of the exit route should be
programmed with the exit option in the assigned zone type.
AR001 Exit
time: 030 secs
To enter a exit delay time (000 to 250), use the keypad as explained in section Entering
Decimal Numbers on Page 405 and press [ENTER]. An exit delay time of 000 seconds will
result in the area arming instantly.
Area Siren Bell Time
The bell time determines how long the bell/siren output for the area will remain activated
before timing out. If the option to retrigger the bell time is set in the zone type assigned to a
zone that is triggered in the area the siren bell time is reloaded on each subsequent alarm
activation.
Use the siren bell time and the retrigger bell option from the zone type for smart automation
of lighting and building control.
AR001 Bell
time: 004 mins
To enter a bell siren time (000 to 250 minutes), use the keypad as explained in section
Entering Decimal Numbers on Page 405 and press [ENTER]. A bell siren time of 000 will
result in no siren or bell activation.
151 Protégé Integrated System Controller Reference Manual