PRT CTRL Integrated Controller Reference Manual

Enabled the zone type will deactivate the automation point when the zone
assigned this zone type goes in to alarm.
Disabled the zone type takes no action on the automation point.
Option 4 - Deactivate Automation on Restore
Enabled the zone type will deactivate the automation point when the zone
assigned the zone type restores.
Disabled the zone type takes no action on the automation point.
Option 5 - Toggle Automation State on Alarm
Enabled the zone type will toggle the current state of the automation
number that has been assigned.
Disabled the zone type takes no action on the automation point.
Option 6 - 24HR Audible If Area Armed
Enabled the zone type will activate the bell PGM if a 24HR alarm is
generated when the area is armed. Please note that this option will be
overridden by option 6 and will have no affect.
Disabled the 24HR will be silent. This will have no affect if option 6 is
enabled.
Option 7 - 24HR Always Audible
Enabled the zone type will always activate the bell PGM for the area if a
24HR tamper alarm occurs. This option will override option 5 when enabled.
Disabled the 24HR will be silent.
Option 8 - Reserved
Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
Zone Control PGM Options
Zone PGM options for the zone type, configure how the zone type will process the activation
of the PGM assigned to the zone (not the zone type).
ZT001 Zone Ctrl
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 – Use Zone Type PGM Time
Enabled the zone will activate the PGM timed (if a time is programmed) and
use the PGM Time Set in the Zone Type. If the zone type does not have a
Protégé Integrated System Controller Reference Manual
142