PRT CTRL Integrated Controller Reference Manual

Option 8 - Activate Entry PGM For Bell Siren Time Duration
Enabled the zone type will activate the entry PGM programmed for the area
for the duration of the bell siren time.
Use this feature for a zone that you want to only generate a beeper alarm
and assign the entry PGM a keypad beeper pgm. This option will not
function if the bell option is enabled.
Disabled the zone type operates normally.
It is recommended not to enable/disable or modify the settings of reserved options.
Zone Type PGM Options
PGM options for the zone type configure options for various functions that control the PGM's
programmed in a zone type.
ZT001 Pgm Ctrl
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Activate Bypass PGM
Enabled the zone type will activate bypass PGM for the area if a zone is
bypassed.
Disabled the zone type will not activate the bypass PGM.
Option 2 - Activate Tamper PGM
Enabled the zone type will activate the tamper PGM for the area if a tamper
alarm occurs.
Disabled the zone type will not activate the tamper PGM.
Option 3 - Activate Memory PGM
Enabled the zone type will activate the memory PGM for the area if an alarm
occurs.
This option can be used to indicate that an alarm has occurred in the
system. Use this feature to display an indication to the users of the
system to prevent possible "Sitter and Hostage" situations.
Disabled the zone type will not activate the memory PGM when an alarm
occurs.
Option 4 - Activate Control PGM On Alarm
Enabled the zone type will activate the control PGM when the zone assigned
generates an alarm.
Disabled the zone type takes no action on the control PGM.
Protégé Integrated System Controller Reference Manual
140