PRT CTRL Integrated Controller Reference Manual

ZT001 Misc
[1-3-----]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Generate Siren Bell Output
Enabled the zone type will activate the siren bell output programmed for the
area.
Disabled the zone type will not generate a bell output.
Option 2 - Restart Siren Bell Timer
Enabled the zone type will restart the bell timer on each subsequent alarm.
Disabled the zone type will not alter the bell timer if it is already active.
Option 3 - Save Alarm to Memory
Enabled the zone type will save an alarm message to the area's alarm
memory storage area.
Disabled the zone type does not save an alarm message.
Option 4 - Disarm Control Area on Restore
Enabled the zone type will disarm the control area when a zone assigned
the zone type restores from an alarm condition.
Use this feature and the arming control area feature as a on and off key
switch arming input.
Disabled the zone type takes no action on the control area.
Option 5 - Arm Control Area on Alarm
Enabled the zone type will start arming the control area when a zone
assigned the zone type generates an alarm condition.
Disabled the zone type takes no action on the control area.
Option 6 - Toggle Control Area State On Alarm
Enabled the zone type will toggle the state of the control area when the
zone that is assigned this zone type generates an alarm.
Disabled the zone type operates normally.
Option 7 - Force Arm Tamper
Enabled the zone type will allow the zone to be force armed if the zone
assigned the zone type is tampered.
Disabled the zone type operates normally.
139 Protégé Integrated System Controller Reference Manual