PRT CTRL Integrated Controller Reference Manual

Enabled the zone type will generate a reportable tamper message.
Disabled the zone type does not generate a reportable tamper message.
Option 3 - Report Bypass
Enabled the zone type will generate a reportable bypass message.
Disabled the zone type does not generate a reportable bypass message.
Option 4 - Report Restore
Enabled the zone type will generate a reportable restore message.
Disabled the zone type does not generate a reportable restore message.
Option 5 - Stay Zone
Enabled the zone type will generate an alarm if the area is armed in stay
mode. The zone will stay armed. For zones that will be active when an area
is armed in stay mode it is recommended to disable the event log for the
zone.
Disabled the zone type operates normally.
Option 6 - Force Zone
Enabled the zone type will allow the zones it is assigned to be force armed.
Disabled the zone type operates normally.
Option 7 - No Exit Test
Enabled the zone type will not verify the status of a zone prior to the area
starting to arm. Use this feature to assign zones in exit locations to prevent
the area from generating a zone open warning when being armed.
Disabled the zone type operates normally.
Option 8 - Recycle Zone On Exit Delay
Enabled the zone type will recheck the zones it is assigned when the area
completes the exit delay cycle and if a zone is open recycle the zone to
force it in to generating an alarm.
Use this feature for a zone type used on a zone that may be
breached during the exit delay such as a window or door contact.
Disabled the zone type operates normally.
It is recommended not to enable/disable or modify the settings of reserved options.
Zone Type Miscellaneous Options
Miscellaneous options for the zone type configure options for various functions.
Protégé Integrated System Controller Reference Manual
138