PRT CTRL Integrated Controller Reference Manual

functions based on a 7 day week and 24 hour clock. For more information on the
programming of the schedule refer to the Schedule Programming section on Page 344.
ZT001 Schedule
None
Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the
schedule displayed. For more information about the list control data entry refer to the section
List Control Data Entry on Page 406.
Secondary Zone Type
A secondary zone type can be selected that will be used when the schedule of the zone type
that is programmed is not valid. The schedule of the secondary zone type must be valid or set
to none.
ZT001 Secondary
None
Use the [1] and [3] keys to scroll the secondary zone type selection and press [ENTER] to
select the zone type displayed. For more information about the list control data entry refer to
the section List Control Data Entry on Page 406. Programming a secondary zone type with the
current zone type being edited will perform no function.
Zone Type Keypad Group
A zone type keypad determines which keypads will be presented with alarm information when
the zone that the zone type is assigned generates an alarm.
ZT001 Key Grp
None
Use the [1] and [3] keys to scroll the available keypad groups and press [ENTER] to select
the keypad group displayed. For more information about the list control data entry refer to
the section List Control Data Entry on Page 406.
Control Area
A zone type can be programmed to control the arming and disarming state of an area from a
zone input (key switch control). The area to be controlled by the zone type must be
programmed with the force arming option. Arming using a zone type is deemed to be a
unattended arming condition and therefore the system will attempt to arm the area in the
force mode.
ZT001 Ctrl Area
None
Use the [1] and [3] keys to scroll the available area's and press [ENTER] to select the area
displayed. For more information about the list control data entry refer to the section List
Control Data Entry on Page 406.
135 Protégé Integrated System Controller Reference Manual